Electro-Voice Zx1i-100T Manuel du propriétaire télécharger pdf (Page 7)

Electro-Voice

Zx1i Owner’s Manual 7

Step 3: Select the horn dispersion orientation– If necessary

For the 90° x 50° horn version you may elect to rotate the horn assembly for more

effective coverage depending on the orientation of the speaker cabinet in your

installation. The horn is factory-installed with the 90° coverage in the horizontal plane

and the 50° coverage in the vertical plane as shown in Figure 8 below.

To rotate the horn follow the steps below:

1. Remove the logo badge to expose grille mounting screws.

2. Remove the grille assembly – see illustration

3. Remove the screws holding the horn assembly in place. – see illustration

4. Rotate the horn assembly 90°.

5. Secure the horn assembly back to the baffle with the horn mounting screws.

6. Secure the grille assembly to the baffle with grille mounting screws.

7. Secure the logo badge back onto the grille.

Figure 8: Horn Rotation (90° x 50° Models Only)

Logo Badge

Grille Mount

Screws

Grille

Assembly

Enclosure

Horn Mount

Screws

90° x 50°

Horn

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Electro-Voice Zx1i-100T Manuel du propriétaire Page 7