Electro-Voice EVF-1181S Spécifications Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Bosch Communications Systems 04/2011

U.S.A. and Canada only. For customer orders, contact Customer Service at:

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

Other Internatonal locations. For customer orders, Contact Customer Service at:

For warranty repair or service information, contact the Service Repair department at:

For technical assistance, contact Technical Support at: 
Specifications subject to change without notice.
Electro-Voice
Series Model Woofers DCR Value Compression Drivers DCR Value PTP Network DCR Value
EVA
EVA-2082S
(All Coverage Patterns)
(2) 8” [203mm] 43.2 ± 1.0Ω (4) 1.25” [32mm] 41.6 ± 1.0Ω Yes <46.0Ω
EVF
EVF-1122S
(All Coverage Patterns)
(1) 12” [ 305mm] 5.0 ± 0.5Ω (1) 2” [51mm] 4.3 ± 0.5Ω Yes <2.0Ω
EVF-1122D
(All Coverage Patterns)
(1) 12” [ 305mm] 5.0 ± 0.5Ω (1) 3” [76mm] 4.3 ± 0.5Ω Yes <2.0Ω
EVF-1152S
(All Coverage Patterns)
(1) 15” [381mm] 5.0 ± 0.5Ω (1) 2” [51mm] 4.3 ± 0.5Ω Yes <2.0Ω
EVF-1152D
(All Coverage Patterns)
(1) 15” [381mm] 5.0 ± 0.5Ω (1) 3” [76mm] 4.3 ± 0.5Ω Yes <2.0Ω
EVF-1121S (1) 12” [ 305mm] 3.8 ± 0.5Ω None N/A No N/A
EVF-1151S (1) 15” [381mm] 5.4 ± 0.5Ω None N/A No N/A
EVH
EVH-1152S
(All Coverage Patterns)
(1) 15” [381mm] 5.0 ± 0.5Ω (1) 2” [51mm] 4.3 ± 0.5Ω Yes <2.0Ω
EVH-1152D
(All Coverage Patterns)
(1) 15” [381mm] 5.0 ± 0.5Ω (1) 3” [76mm] 4.3 ± 0.5Ω Yes <2.0Ω
3. Test the PTP (Power Tracking Protection) networks: Test the PTP network for the UPPER
compression driver pair by placing one test lead securely on the UPPER GREEN test point
and the other on the BLACK (common) test point on the Access Card. A properly function-
ing PTP will read no more than 46 ohms (See Figure 8a). If the reading is higher, replace
the SK-3 lamps on the crossover PCB. To test the PTP network for the LOWER compres-
sion driver pair, repeat the above test using the LOWER GREEN test point (See Figure 8b).
4. Unplug the Access Card and re-install the HF shading switch card in exactly the same posi-
tion it was in originally. If applicable, re-attach the security cover, gland nut cover, or NL4
cover.
Figure 9:
EVA Direct Access for
Transducer Pairs
Figure 8a:
EVA Upper Protection
Network Test
Figure 8b:
EVA Lower Protection
Network Test
44.7 44.7
Vue de la page 3
1 2 3 4

Commentaires sur ces manuels

Pas de commentaire